Aros PETG ESD
FDM Filament
Aros PETG ESD is a graphene-enhanced, high-speed ESD-safe filament engineered for electronics manufacturing and industrial FDM production.
- Surface resistivity: 10⁴–10⁸ Ω/cm
- Recommended print speed: 150 mm/s
- Max print speed: 250 mm/s
- Max volumetric flow: 25 mm³/s
- Non-abrasive – no hardened nozzle required
Developed with Filalab UAB.
Visit Filalabs Webshop
Why Aros PETG ESD?
Fastest-Printing PETG ESD on the Market
Unlike conventional carbon-heavy ESD filaments, Aros PETG ESD uses low filler loading enabled by AROS graphene technology.
This allows:
- 150 mm/s recommended speed at 0.2 mm layer height
- Up to 250 mm/s maximum printing speed
- 25 mm³/s volumetric flow
- Stable extrusion at high throughput
Most ESD PETG materials are limited by poor flow and clogging.
Aros is designed for production speed.
Reliable ESD Performance
Typical printed part properties:
- Surface resistance: 10³–10⁷ Ω
- Surface resistivity: 10⁴–10⁸ Ω/sq.
- Tested according to ANSI/ESD STM11.11
Suitable for use in ESD-controlled environments (EPA).
Electrical properties may increase with higher processing temperature.
Engineered for Printability
Aros PETG ESD is optimized for real-world manufacturing:
- No stringing
- No clogging
- Excellent overhang performance
- No abrasive wear on nozzles
- Compatible with standard brass nozzles
Low filler content reduces brittleness and improves layer adhesion compared to heavily carbon-filled alternatives.
Typical Applications: Electronic housings and enclosures, PCB handling fixtures, Assembly jigs and production tooling, ESD safety equipment, Powder handling equipment, Robotics and automation component.
Printing parameters
- Nozzle temperature: 255–275 °C
- Bed temperature: 60 °C
- Recommended speed: 150 mm/s
- Maximum speed: 250 mm/s
- Maximum volumetric flow: 25 mm³/s
- Cooling: 0–30 %
- May need drying if exposed to humid eniorments
We recommended doing a flow calibration. Generic PETG settings are usually low at 0.95-0.97. Aros PETG ESD requires a value close to 1.0 or may suffer low mechanical performance.
Downloads
Related Products
- AROS PETG ESD 104 - Polymer compound
- AROS PETG ESD 106 - Polymer compound
- AROS PETG ESD 108 - Polymer compound
- AROS PETG Reinforced - FDM filament
- AROS PVDF ESD 201 - FDM filament
- AROS PPS ESD - FDM filament
Contact our materials team
Fill in the form, or send an email directly to our sales department:
[email protected]
For general questions:
[email protected]
Hope to hear from you soon!