Filament Drying

The filament has been vacuum-dried and packaged in a vacuum-sealed bag. If the bag has been opened for some time, we recommend drying it at 60 °C for 4-6 hours in a filament dryer or oven with good temperature control.

Process parameters

The following process parameters have been developed in an enclosed Bambu lab P1S printer. These are recommended starting values. Individual prints may require adjustments to achieve optimal results. If there are any problems, don't hesitate to get in touch with us.

• Nozzle Temperature: 260°C (240-270°C)
• Build Plate Temperature: 100 °C
• Max Volumetric Flow: 12 mm^3/s
• Cooling: 10-80 % (increase only for small features or bridging)

Flow calibration/Extrusion multiplier

For the best print quality, we strongly recommend performing a flow calibration when using this filament. Incorrect flow settings may result in under-extrusion (gaps, weak layers) or over-extrusion (rough surfaces, poor dimensional accuracy).