Aros PETG Reinforced

Printing parameters

The following process parameters have been developed in an enclosed Bambu lab P1S printer. These are recommended starting values. Individual prints may require adjustments to achieve optimal results. If there are any problems, don't hesitate to get in touch with us [email protected] or +46 79-339 68 14

• Nozzle Temperature: 255 °C (240-270°C)
• Build Plate Temperature: 70 °C
• Max Volumetric Flow: 12
• Cooling: 40-90 % (increase only for small features or bridging)

Flow calibration/Extrusion multiplier

For the best print quality, we strongly recommend performing a flow calibration when using this filament.

Incorrect flow settings may result in under-extrusion (gaps, weak layers) or over-extrusion (rough surfaces, poor dimensional accuracy).

TDS coming soon.